Product Specification Solvent based
Sheen Level N/A
Coverage 10-12m2 per litre per coat
-
Ensure surfaces are free from loose and flaking paint. Wash surfaces with a suitable cleaner prior to painting to remove any oil, grease, dirt or other contaminants. White rust should be treated with a suitable rust remover solution. Red rust should be wire brushed down to bare metal. Where there are areas of mould, treat with a mould remover.
Cleaned areas should be primed within 4 hours to prevent rust reoccurrence.
-
Brush
Roller
Spray -
Stir thoroughly before use with a broad flat paddle, using an up and down scooping motion.
Apply 1-2 coats of Procoat Galvanised Iron Primer, and allow to dry overnight.
-
1L, 4L, 20L
-