Image 1 of 2
Image 2 of 2
-
For general cleaning dilute 1 part cleaner with 4 parts water. Areas which have high levels of build up dilute 1 part cleaner with 1 part water.
-
Remove all surface dirt with a broom or brush. Wet the surface with water before applying. Apply the cleaner to the surface using a soft broom or brush, ensuring the surface is soaked and covered. Rinse off after 5 minutes, before the surface dries. When cleaning large areas, it is recommended to work in sections to ensure the cleaner doesn’t dry out.
Allow timber to dry thoroughly before painting, staining or oiling.
Avoid contact with delicate vegetation. If contact occurs, rinse well with water.
If using to clean a roof where potable water is collected, disconnect all downpipes from water tanks before cleaning. Do not reconnect until after several periods of rain to ensure any remaining product is washed away.
-
1L, 4L
-