-
For new or lightly greyed timber dilute 1 part cleaner with 4 parts water.
For heavily grey or weathered timber dilute 1 part cleaner with 1 part water.
-
Broom
-
Remove all surface dirt with a broom or brush. Wet the surface with water before applying. Apply the cleaner to the surface using a soft broom or brush. Leave for 5-10 minutes before scrubbing with a stiff bristle brush or broom. Wash off with a hose or pressure washer before the cleaner dries. Rinse off after a maximum of 20 minutes.
Allow timber to dry thoroughly before painting, staining or oiling.
Avoid contact with paints, sealants, metal surfaces and vegetation. If contact occurs, rinse well with water.
Do not exceed application time. Oxalic acid may cause timber discoloration if used for prolonged periods.
For exterior use only.
-
1L, 4L
-