Image 1 of 2
Image 2 of 2
Product Specification Waterbased
Sheen Level Satin finish (20% gloss)
Coverage 10-12m2 per litre per coat
-
Ensure surfaces are free from loose and flaking paint. Wash surfaces with a suitable cleaner such as sugar soap prior to painting to remove dirt, oils, grease and other contaminants. Where there has been mould, treat the area with a moss and mould remover.
-
Brush
Roller
Spray -
For best results, do not paint in direct sunlight or hot conditions as paint can dry too quickly.
If painting over old oil based enamels, wash down with sugar soap and sand lightly to a dull finish.
Stir well before and during use with a broad, flat paddle, using an up and down scooping motion.
Prime any bare substrate with a suitable primer or sealer (see data sheet).
Apply 2 coats of Procoat Urban Home Waterbased Enamel Satin, allowing 2 hours between coats.
-
4L
-
White, and colours tinted from a white base.
-
Maintain your interior paint finish by cleaning with a damp cloth and neutral detergent (such as diluted sugar soap). Cleaners that contain solvents may affect the surface appearance and the paints longevity. Dry dust corners frequently to avoid dust and dirt build up.
Maintain your exterior paint surface by washing it every 12 months (after each winter is a great time), with a suitable exterior cleaner such as Procoat Exterior House & Deck Wash to remove dirt deposits. We do not recommend the use of bleach as this can affect the appearance of the colour over time. Dirt, salt, and bird deposits left on the paint surface will encourage the growth of mould, and affect the paints performance.
-