Product Specification Waterbased
Sheen Level Low sheen finish (10% gloss)
Coverage Up to 10m2 depending on timber porosity
-
Ensure surfaces are free from loose and flaking paint. Wash surfaces with a suitable exterior cleaner such as Procoat Exterior House & Deck Wash prior to painting to remove dirt, oils, grease and other contaminants. Where there has been mould, treat the area with a mould remover.
-
Brush
Spray -
Stir paint thoroughly with a broad flat paddle, using an up and down scooping motion.
Apply 1-2 coats of Procoat Fence Paint, allowing 2 hours between coats.
-
10L
-
Ebony, Ironsand, Mission Brown, Iron Grey, Barn Red, Valley Green
-
We recommend washing every 12 months (after each winter is a great time) with a suitable exterior cleaner such as Procoat Exterior House & Deck Wash to remove dirt deposits. Dirt, salt and bird deposits left on the surface will encourage the growth of mould and affect the paints performance.
-
Downloads these information sheets