Procoat Spraying Enamel

from $199.00

For a hard-wearing finish on steel, galvanised iron and other metals.

Procoat Spraying Enamel is a fast drying machine enamel designed for interior and exterior applications, where a hard-wearing finish is required.

Available at Aalto Stores and Stockists

Color:

For a hard-wearing finish on steel, galvanised iron and other metals.

Procoat Spraying Enamel is a fast drying machine enamel designed for interior and exterior applications, where a hard-wearing finish is required.

Available at Aalto Stores and Stockists

Enquire Now
 


Product Specification Solvent based
Sheen Level Gloss
Coverage 8-10m2 per litre per coat

  • Ensure surfaces are free from loose and flaking paint. Wash surfaces with a suitable cleaner prior to painting to remove any oil, grease, dirt or other contaminants. Where there are areas of mould, treat with a mould remover.

  • Brush
    Roller
    Spray

  • Treat and remove any rust present.

    Apply 1 coat of Procoat Etch Primer, allow 2 hours to dry.

    Apply 1 or 2 coats of Procoat Spraying Enamel, allowing 6 hours between coats.

  • 20L

  • White and tinted colours

  • Data Sheet MSDS Sheet