Procoat Zinc Phosphate Primer

from $199.00

A premium anti-corrosive zinc primer.

Procoat Zinc Phosphate Primer is an acrylated rubber zinc phosphate anti-corrosive primer, which provides excellent adhesion to steel. 

Available at Aalto Stores and Stockists

Color:

A premium anti-corrosive zinc primer.

Procoat Zinc Phosphate Primer is an acrylated rubber zinc phosphate anti-corrosive primer, which provides excellent adhesion to steel. 

Available at Aalto Stores and Stockists

Enquire Now
 


Product Specification Solvent based
Coverage 8-10m2 per litre per coat

  • Ensure surfaces are free from loose and flaking paint. Wash surfaces with a suitable cleaner prior to painting to remove any oil, grease, dirt or other contaminants. Where there are areas of mould, treat with a mould remover.

    Best results are obtained on shot blasted steel, but mechanically abraded steel produces acceptable adhesion.

  • Brush
    Roller
    Spray

  • Galvanised steel:
    Apply 1 coat of Procoat Zinc Phosphate Primer, allow 12 hours (minimum) to dry. Apply 1 or 2 coats of selected topcoat.

    Steel:
    Shot blast to SA 2.5 or SSPC-SP2-82. Mechanically abrade to remove loose rust and scale.

    Apply 1 coat of Procoat Zinc Phosphate Primer, allow 12 hours (minimum) to dry.

    Apply 1 or 2 coats of selected topcoat.

  • 4L

  • Standard Grey

  • Data Sheet